4.3 Install the Inverter
4.3.1 Mount on the wall:
Step 1: Mark position holes with the
mounting bracket, then drill holes with a
diameter of 13 mm and a depth of 65 mm in
the wall. The holes are shown below.
969mm
OB hole 12x18
Step 3: Install handles or lifting rings on both sides of the inverter.
Step 4:
Install personnel can hold the handles or use lifting devices to hang the inverter on the mounting bracket.
09
Step 2: Fix the mounting bracket on the wall with
expansion screws. Customers have to prepare the M10
expansion screws.
Expansion
Mounting bracket
Screw
tube
or
4.3.2 Mount on the bracket:
Step 1: Mark position holes with the
mounting bracket first and drill holes with a
diameter of 13 mm and a depth of 65 mm in
the wall. The holes are shown below.
969 mm
OB hole 12x18
Step 3: Install handles or lifting rings on both sides of the inverter.
Step 4:
Install personnel can hold the handles or use lifting devices to hang the inverter on the mounting bracket.
Step 2: Fix the mounting bracket on the
stand with the combination bolts in the
accessory pack.
Stand
Combination bolt
Mounting Bracket
or
10