Appearance - Goodwe GW250K-HT User Manual

3.4 Appearance

Check the product to confirm it is the right model you purchased after unpacking the package.
Product appearance shows as below.
Front/Side/Bottom View
11
12
Side View Front View
1 2
Bottom View
1. DC switch*
2. DC terminal
3. USB port(Bluetooth)
4. RS485 Communication port
5. Tracking system Communication
port
6. Reserved Commu nication port
7. AC junction box
8. Fan components
*DC switch：
DC switch 1-3 （to control MPPT1-MPPT3 terminals）
DC switch 4-6 （to control MPPT4-MPPT6 terminals）
DC switch 7-9 （to control MPPT7-MPPT9 terminals）
DC switch 10-12 （to control MPPT10-MPPT12 terminals）
05
7
10
15
14
Side View
3
4
5
6
1
8
9. Hook
10. Indicator
11. Mounting hole for lifting ring or
handle
12. Mounting hole for handle
13. Grounding terminal
14. Button(optional)
15.LCD(optional)
No.
1 DC switch
9
11
2 DC terminal
3 USB port(Bluetooth)
8
4 RS485 communication port
13
5 Tracking system communication port
12
6
Reserved communication port
7 AC junction box
8 Fan combination
9 Hook
10 Indicator
11
Mounting hole for lifting ring or handle
12 Mounting hole for handle
13 Grounding terminal
14 Button
15 LCD
Dimension
341mm
Name
Used to safely disconnect the DC input when it＇
s necessary. The inverter will automatically start
working when input or output meets require-
ments. Turn the DC switch to ＂OFF＂ to cut the
DC input or to ＂ON＂ before starting the
inverter.
To connect PV strings.
To connect the Bluetooth communication box.
To connect RS485 communication devices.
To connect the tracking system.
To connect AC cables.
Used for inverter heat dissipation, and need regular cleaning.
To fix the inverter on the mounting bracket.
Display the operating status of the inverter.
To install the inverter handle and lift ring.
To install the inverter handle.
To connect the grounding cables and ground the inverter.
To operate and configure the inverter.
To check the operating parameters of the inverter.
1091mm
Description
341mm
678mm
06