System Setup→Rtd3 Settings - VersaLogic VL-EPU-4011 Reference Manual

Option: PEP EMMC
Disabled
Enabled (default)
Details: Add EMMC in PEP mitigation list
Option: PEP SDXC
Disabled
Enabled (default)
Details: Add SDXC in PEP mitigation list
System Setup→RTD3 settings
Option: RTD3 Support
Disabled (default)
Enabled
Details: Enable/Disable Runtime D3 support
Option: Consolidated Power Resource
Disabled (default)
Enabled
Details: Enables/Disables 1 Power Resource for all power gated devices except Network
device. Use this for Modern Standby test.
Option: VR Staggering delay
Minimum = 0x0000
Maximum = 0x0064
Default = 0x0010
Details: Delay between subsequent VR power on to avoid current spike
Option: VR Ramp up delay
Minimum = 0x0000
Maximum = 0x0064
Default = 0x0010
73 VL-EPU-4011 BIOS Reference Manual
System Setup