System Setup→Debug Configuration - VersaLogic VL-EPU-4011 Reference Manual

Option: High Speed Serial IO SSC Selection Table
%0 (No SSC)
-0.1%
-0.2%
-0.3%
-0.4%
-0.5% (default)
Details: Choose the item in SSC selection table for High Speed Serial IO spread
spectrum
System Setup→Debug Configuration
---- Kernel Debugger Configuration ----
Option: Kernel Debugger Enable
Disable (default)
Enable
Details: Enable or disable support for a kernel debugger (e.g. WinDBG). This mode
configures the UART2 device for Legacy 16550 8-bit Addressing Mode and hides the
device from the OS.
---- APEI BERT Configuration ----
Option: APEI BERT
Enable (default)
Disable
Details: Enable or Disable APEI BERT
---- ACPI Memory Debug Switch ----
Option: ACPI Memory Debug
Disable (default)
Enable
Details: Enable or Disable ACPI Memory Debug
59 VL-EPU-4011 BIOS Reference Manual
System Setup