VersaLogic VL-EPU-4011 Reference Manual page 44

System Setup
Option: SATA Mode Selection
AHCI (default)
RAID
Details: Determines how SATA controller(s) operate.
Option: SATA Test Mode
Enabled
Disabled (default)
Details: Test Mode Enable/Disable
Option: Aggressive LPM Support
Disabled
Enabled (default)
Details: Enable PCH to aggressively enter link power state.
Option: Port 0
Disabled
Enabled (default)
Details: Enable or Disable SATA Port
Option: SATA Port 0 Hot Plug Capability
Disabled (default)
Enabled
Details: If enabled, SATA port will be reported as Hot Plug capable.
Option: Mechanical Presence Switch
Disabled
Enabled (default)
Details: Controls reporting if this port has an Mechanical Presence Switch.
Note: Requires hardware support.
VL-EPU-4011 BIOS Reference Manual 44