VersaLogic VL-EPU-4011 Reference Manual page 45

Option: Spin Up Device
Disabled (default)
Enabled
Details: If enabled for any of ports Staggerred Spin Up will be performed and only the
drives which have this option enabled will spin up at boot. Otherwise all drives spin up at
boot.
Option: SATA Device Type
Hard Disk Drive (default)
Solid State Drive
Details: Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
Option: SATA Port 0 DevSlp
Disabled (default)
Enabled
Details: Enable/Disable SATA Port 0 DevSlp. Board rework for LP needed before
enable.
Option: DITO Configuration
Disabled (default)
Enabled
Details: Enable/Disable DITO Configuration
Option: DITO Value
Minimum = 0x0000
Maximum = 0x03FF
Default = 0x0271
Details: DITO Value
Option: DM Value
Minimum = 0x00
Maximum = 0x0F
Default = 0x0F
Details: DM Value
45 VL-EPU-4011 BIOS Reference Manual
System Setup