VersaLogic VL-EPU-4011 Reference Manual page 46

System Setup
Option: Port 1
Disabled
Enabled (default)
Details: Enable or Disable SATA Port
Option: SATA Port 1 Hot Plug Capability
Disabled (default)
Enabled
Details: If enabled, SATA port will be reported as Hot Plug capable.
Option: Mechanical Presence Switch
Disabled
Enabled (default)
Details: Controls reporting if this port has an Mechanical Presence Switch.
Note: Requires hardware support.
Option: Spin Up Device
Disabled (default)
Enabled
Details: If enabled for any of ports Staggerred Spin Up will be performed and only the
drives which have this option enabled will spin up at boot. Otherwise all drives spin up at
boot.
Option: SATA Device Type
Hard Disk Drive (default)
Solid State Drive
Details: Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
Option: SATA Port 1 DevSlp
Disabled (default)
Enabled
Details: Enable/Disable SATA Port 1 DevSlp. Board rework for LP needed before
enable.
VL-EPU-4011 BIOS Reference Manual 46