VersaLogic VL-EPU-4011 Reference Manual page 75

Option: I2C1 Controller
Minimum = 0x0000
Maximum = 0x03E8
Default = 0x0000
Details: Delay in _PS0 I2C1 Controller.
Option: TouchPad
Minimum = 0x0000
Maximum = 0x03E8
Default = 0x0044
Details: Delay after applying power to TouchPad device.
Option: TouchPanel
Minimum = 0x0000
Maximum = 0x03E8
Default = 0x0044
Details: Delay in PR _ON after applying power to TouchPanel device.
Option: P-state Capping
Disabled (default)
Enabled
Details: Set _PPC and send ACPI notification
Option: USB Port [1-2]
High Speed
Super Speed
Disabled (default)
Details: USB RTD3 support.
Super Speed : USB3.0 devices will be exposed as RTD3 capable.
High Speed: USB2.0 devices will be exposed as RTD3 capable.
Disabled : USB RTD3 support disabled.
For SawtoothPeak USB Port1(Below) is Superspeed and Port2(Top) is
HighSpeed. Check respective board configuration to know about USB port
position.
75 VL-EPU-4011 BIOS Reference Manual
System Setup