5
Operation
5.1
General safety instructions
20 / 41
CAUTION!
Risk of heat transfer liquid escaping during operation due to
open consuming unit
Scalding, cold burns
Always use hydraulically sealed consuming units.
CAUTION!
Risk of heat transfer liquid escaping due to the use of unsuitable
hoses
Scalding, cold burns
The temperature and media resistance of the hoses must be
suitable for the application.
CAUTION!
Overheating exceeding the maximum temperature of the appli-
cation
Scalding, burning
In cases of error, temperatures of up to 125 °C may occur
on the heat sink in the device. Do not touch the heat sink.
NOTICE!
Overheating of the pump
Device damage
Never operate the device without heat transfer liquid.
LOOP
V3