AT&T Merlin II User Manual page 13

CHANGING THE
AUTHORIZED CALLER
CODE
SETTING THE CURRENT
DAY, DATE, AND TIME
2-2 Changing the Current Settings
To prevent unauthorized changes to recorded announcements or programmed
settings, an authorized caller code must be entered before any changes can be
made to the programming of the MERLIN II Attendant. The default code
number is 789 but it can be changed to any sequence of numbers from one to
20 digits in length. Follow the procedure below to change the code:
Dial the MERLIN II Attendant extension number from a Touch-Tone
1
phone, preferably a single-line set.
If you are programming from a multiline Touch-Tone phone
NOTE:
connected to the MERLIN II system control unit, you must enter
an additional pound ( # ) sign each time a pound ( # ) sign appears
in a programming command.
Wait for an answer.
2
Dial *6 followed by the current authorized caller code and #.
3
The two-beep confirmation tone sounds.
Dial *6 followed by the new authorized caller code you have chosen.
4
Dial #.
5
The two-beep confirmation tone sounds.
Enter the new authorized caller code again.
6
Dial # to confirm the new authorized caller code.
7
The two-beep confirmation tone sounds.
Continue programming or exit authorized caller mode by dialing *#.
8
To disconnect, dial #.
9
Refer to the following instructions to set the current day, date, and time for
the MERLIN II Attendant clock.
If you have never set the MERLIN 11 Attendant clock or if you have
NOTE:
lost your programming due to a power failure, the date is set to
01/01/80, the time is set to zero, and the MERLIN 11 Attendant will be
in Day mode (Day announcement with Day routing plan) until the
clock is reset.
Dial the MERLIN II Attendant extension number from a Touch-Tone
1
phone, preferably a single-line set.
you are programming from a multiline Touch-Tone phone
If
NOTE:
connected to a MERLIN II system control unit, you must enter an
additional pound ( # ) sign each time a pound ( # ) sign appears in
a programming command.
Wait for an answer.
2
Dial * followed immediately with your authorized caller code and #.
3
The two-beep confirmation tone sounds.
Dial *71 followed by a code for the current day of the week.
4
1 = Sunday
2 = Monday
3 = Tuesday
=
Wednesday
4
5 = Thursday
6 = Friday
7 = Saturday