Replacement Procedures
Cleaning the Filter / Replacement
1. Power down the system.
2. Remove the filter which is located on the bottom
of the Invenia ABUS 2.0.
The filter is attached using Velcro.
3. Vacuum the filter.
8-6
Clean the filter on a monthly basis. This will also be performed
by the Service Engineer during their normal PM process. To
clean or replace the Filter,
Table 8-1:
Steps
Invenia ABUS 2.0 – System Setup and Basic Service Manual
Cleaning the Filter
Illustrations
4700-0043-00 Rev. 4