GE Invenia ABUS 2.0 Technical Publication page 183

Ultrasound transducer
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
The ABUS 2.0 system is designed to use compatible
transducers (electrically and physically).
When the Scan Head Assembly and Transducer is ready to
begin the scan, the Transducer is moved to 2 cm from the center
(in either direction) of the Scan Head Assembly. This is so the
Scan Head Assembly can be centered on the patient's nipple.
Figure 5-9. Transducer with Positioning Arrows
Arrows on the sides of the Transducer indicate where to position
the breast nipple on the Transducer for different View Types
(Lateral, Anterior/Posterior, and Medial).
Arrows identify these position types
1. Anterior/Posterior
2. Lateral and Medial
3. Not Used
General theory of operation
5-21