GE Invenia ABUS 2.0 Technical Publication page 244

Diagnostics/Troubleshooting
Error Code List (continued)
GE US
36001 GEUS Info
36002 GEUS Info
36003 GEUS Info
36004 GEUS Info
36005 GEUS Info
36006 GEUS Info
36007 GEUS Info
36008 GEUS Info
36009 GEUS Info
36010 GEUS Info
36011 GEUS Info
36012 GEUS Info
36013 GEUS Info
36014 GEUS Info
7-50
Info Messages
INFO_TRANSDUCER_REMOVE_001 - Transducer at port %d is
removed!
INFO_TRANSDUCER_INSERT_002 - transducer %s at port %d is
inserted
INFO_TRANSDUCER_INDEFINITE_003 - Indefinite Transducer
Error :transducer %s in connector %
INFO_TRANSDUCER_NOT_ACCEPTED_004 -
transducer in connector %d not accepted by system
INFO_SYSTEM_SHUTDOWN_005 - Do you
want to shut down the system?
INFO_MAJOR_SETUP_006 - A minor setup problem occured.
Image quality may not be optimal
INFO_BEP_VOL_007 - Bep Voltage is out of range!
INFO_BEP_FAN_008 - Bep Fan is abnormal!
INFO_TEMP_009 - Bep temperature is out of range!
INFO_TRANSDUCER_010 - Transducer is disconnected
INFO_DIAG_MODE_011 - Enter Diagnostics Mode
INFO_TRANSDUCER_SCANHEAD_REMOVE_012
- Transducer scan head is disconnected
INFO_TRANSDUCER_SCANHEAD_NOT_ACCEPT
ED_013 - The transducer is not supported
INFO_MPSB_BROKEN_014 - The MPSB is
broken
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4