Austin Hughes Electronics Cyberview D-117 User Manual page 8

There are some options to choose from, and the important ones are the following:
Auto Adjust button
If the video displayed is of bad quality or distorted in some way, press this button and
wait a few seconds while IP-KVM switch tries to adjust itself for the best possible
video quality.
Sync Mouse
Choose this option in order to synchronize the local with the remote mouse cursor.
This is especially necessary when using accelerated mouse settings on the host
system. In general there is no need to change mouse settings on the host.
Video Settings in Options Menu
This opens a new window with elements to control the IP-KVM switch Video Settings.
You can change some values, for instance the brightness and contrast of the picture
displayed, which may improve the video quality. It is also possible to revert to the
default settings for all video modes or only the current one.
Note: At first start, if the local mouse pointer is not synchronized with the remote mouse
pointer, press the Auto Adjust Button once.
Figure 1-1. Top part of the Remote Console
7 / 77
KVM over IP Module