(HUB, switches, and routers), you can set the Ethernet interface speed of IP-KVM
switch manually to the values as supported by the network device.
6.6.2 Dynamic DNS
A freely available Dynamic DNS service (www.dyndns.org) can be used in the
following scenario (see Figure 6-26):
The IP-KVM switch is reachable via the IP address of the DSL router, which is
dynamically assigned by the provider. Since the administrator does not know the IP
address assigned by the provider, the IP-KVM switch connects to a special dynamic
Figure 6-25. Dynamic DNS
Figure 6-26. Dynamic DNS Scenario
54 / 77
KVM over IP Module