Austin Hughes Electronics Cyberview D-117 User Manual page 35

The following information has to be given to mount the image properly:
Share host -- The server name or its IP address.
Share folder name -- The name of the share folder to be used.
Image file name -- The name of the image file on the share folder.
User name -- If necessary, specify the user name for the share named in advance. If
unspecified, and a guest account is activated, this guest account
information will be used as your login.
Password -- If necessary, specify the password for the given user name.
To register the specified file image and its location click on the button "Set".
The specified image file is supposed to be accessible from the IP-KVM switch. The
information above has to be given from the point of view of the IP-KVM switch. It is
important to specify correct IP addresses, and device names. Otherwise, IP-KVM
switch may not be able to access the referenced image file.
Furthermore, the specified share has to be configured correctly. Therefore,
administrative permissions are required. As a regular user you may not have these
permissions. You should either login as a system administrator (or as "root" on UNIX
systems), or ask your system administrator for help to complete this task.
Windows 2000/XP
Open the Explorer, navigate to the directory (or share), and press the right mouse
button to open the context menu.
Figure 6-9. Select Windows Share
34 / 77
KVM over IP Module