Austin Hughes Electronics Cyberview D-117 User Manual page 47

User select box
This selection box displays the user ID for which the values are shown and for
which the changes will take effect. You may change the settings of other users if
you have the required privileges.
Transmission Encoding
The Transmission Encoding setting allows changing the image-encoding algorithm
that is used to transmit the video data to the Remote Console window. It is possible
to optimize the speed of the remote screen processing depending on the number
of users working at the same time and the network bandwidth of the connection
line (Modem, ISDN, DSL, LAN, etc.).
Automatic detection
The encoding and the compression level is determined automatically from the
available bandwidth and the current content of the video image.
Pre-configured
The pre-configured settings deliver the best result because of optimized
adjustment of compression and colour depth for the indicated network speed.
Manually
Allows to adjust both compression rate and the colour depth individually.
Depending on the selected compression rate the data stream between the
IP-KVM switch and the Remote Console will be compressed in order to save
bandwidth. Since high compression rates consum more computing power of
IP-KVM switch, they should not be used while several users are accessing the
IP-KVM switch simultaneously.
The standard color depth is 16 Bit (65536 colors). The other color depths are
intended for slower network connections in order to allow a faster transmission
Figure 6-20. User Console Settings (Part 1)
46 / 77
KVM over IP Module