Event Log - Austin Hughes Electronics Cyberview D-117 User Manual

6.6.7 Event Log

Important events like a login failure or a firmware update are logged to a selection of
logging destinations (see Figure 6-33). Each of those events belongs to an event
group, which can be activated separately.
The common way to log events is to use the internal log list of the IP-KVM switch. To
show the log list, click on "Event Log" on the "Maintenance" page. In the Event Log
Settings you can choose how many log entries are shown on each page. Furthermore,
you can clear the log file here.
List logging enabled
The common way to log events is to use the internal log list of the IP-KVM switch .
To show the log list, click on "Event Log" on the "Maintenance" page.
Since the IP-KVM switch's system memory is used to save all the information, the
maximum number of possible log list entries is restricted to 1.000 events. Every
entry that exceeds this limit overrides the oldest one, automatically.
Figure 6-33. Event Log
63 / 77
KVM over IP Module