Serial Port - Austin Hughes Electronics Cyberview D-117 User Manual

6.6.5 Serial Port

The IP-KVM switch Serial Settings (Figure 6-31) allows you to specify what device is
connected to the serial port and how to use it.
Configuration or console login
Do not use the serial port for any special function, use it only for the initial
configuration.
Modem
The IP-KVM switch offers remote access using a telephone line in addition to the
standard access over the built-in Ethernet adapter. The modem needs to be
connected to the serial interface of the IP-KVM switch .
Logically, connecting to the IP-KVM switch using a telephone line means nothing
else than building up a dedicated point-to-point connection from your console
computer to the IP-KVM switch. In other words, the IP-KVM switch acts as an
Internet Service Provider (ISP) to which you can dial in. The connection is
established using the Point-to-Point Protocol (PPP). Before you connect to the
IP-KVM switch, make sure to configure your console computer accordingly. For
instance, on Windows based operating systems you can configure a dial-up
network connection, which defaults to the right settings like PPP.
The Modem Settings panel allows you to configure the remote access to the
IP-KVM switch using a modem. The meaning of each parameter will be described
below. The modem settings are part of the serial settings panel.
Figure 6-31. Serial Port
60 / 77
KVM over IP Module