The Quick Installation Guide - Austin Hughes Electronics Cyberview D-117 User Manual

1. The quick installation guide

The IP-KVM switch redirects local keyboard, mouse and video data to a remote
administration console. It allows you to control one or many computers locally at the server
site or remotely via the Internet using a standard browser. You can securely gain BIOS level
access to systems for maintenance, support, or failure recovery over the Internet.
Communication is secure via SSL encryption. Use in conjunction with a KVM switch for
multiple-server access.
Please perform the following steps:
1. (Optional) Connect the type A connector of USB A-B cable to the host computer, while
using remote mass storage control.
2. Connect Ethernet to LAN port and/or modem to serial port, depending on how you want
to access IP-KVM switch
Please perform the following steps:
3. Power down your computer and IP-KVM switch
4. Connect the power supply to IP-KVM switch
5. Connect the monitor to the IP-KVM switch console side.
6. Connect the keyboard to the IP-KVM switch console side.
7. Connect the mouse to the IP-KVM switch console side.
8. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the host
computer/KVM and the host port of the IP-KVM switch.
9. Connect one purple end of 3-in-1 cable to the PS/2 mouse port on the host
computer/KVM, and the other end of 3-in-1 cable to the host PS/2 mouse port on the
IP-KVM Switch.
10. Connect one green end of 3-in-1 cable to PS/2 keyboard port on the host
computer/KVM, and the other end of 3-in-1 cable to the host PS/2 keyboard port on the
IP-KVM switch.
11. (Optional) Connect the type A connector of USB A-B cable to the host computer, while
using remote mass storage control.
12. Connect Ethernet to LAN port and/or modem to serial port, depending on how you want
to access IP-KVM switch
3 / 77
KVM over IP Module