Date And Time - Austin Hughes Electronics Cyberview D-117 User Manual

6.6.6 Date And Time

This link refers to a page, where the internal real-time clock of the IP-KVM switch can
be set up (see Figure 6-32). You have the possibility to adjust the clock manually, or to
use a NTP timeserver. Without a timeserver, your time setting will not be persistent, so
you have to adjust it again, after IP-KVM switch loses power for more than a few
minutes. To avoid this, you can use a NTP timeserver, which sets up the internal clock
automatically to the current UTC time. Because NTP server time is always UTC, there
is a setting that allows you to set up a static offset to get your local time.
There is currently no way to adjust the daylight saving time automatically. So
you have to set up the UTC offset twice a year properly to the local rules of
your country.
Figure 6-32. Date and Time
Warning
62 / 77
KVM over IP Module