Creating An Image - Austin Hughes Electronics Cyberview D-117 User Manual

Creating an Image

Floppy Images
UNIX and UNIX-like OS
To create an image file, make use of "dd". This is one of the original UNIX utilities and
is included in every UNIX-like OS (UNIX, Sun Solaris, and Linux).
To create a floppy image file, copy the contents of a floppy to a file. You can use the
following command:
dd [ if=/dev/fd0 ] [ of=/tmp/floppy.image ]
dd reads the entire disc from the device /dev/fd0, and saves the output in the
specified output file /tmp/floppy.image. Adjust both parameters exactly to your needs
(input device etc.)
MS Windows
You can use the tool "Raw Write for Windows". It is included on the CD ROM shipped
with IP-KVM switch.
Figure 6-12. RawWrite for Windows selection dialog
From the menu, select the tab "Read". Enter (or choose) the name of the file in which
you would like to save the floppy content. Click on the button "Copy" to initiate the
image creation process.
For related tools you may have a look at
CD ROM/ISO Images
UNIX and UNIX-like OS
To create an image file, make use of "dd". This is one of the original UNIX utilities and
is included in every UNIX-like OS (UNIX, Sun Solaris, and Linux).
www.fdos.org
36 / 77
KVM over IP Module