Austin Hughes Electronics Cyberview D-117 User Manual page 26

Phase Defines the phase for video sampling, used to control the display
quality together with the setting for sampling clock.
Horizontal Position Use the left and right buttons to move the picture in
horizontal direction while this option is selected.
Vertical Position Use the left and right buttons to move the picture in
vertical direction while this option is selected.
Reset this Mode Reset mode specific settings (Clock , Phase and
Position) to the factory-made defaults.
Reset all Modes Reset all settings to the factory-made defaults.
Save changes Save changes permanently
Undo Changes Restore last settings
• Refresh Video
Click to run this menu item for retrieving the whole video again from the
controlled host and displayed on Remote Console. In normal situation, only
changed parts of video will be packed and sent from IP-KVM switch, for saving
network bandwidth. This function is mainly used for troubleshooting purpose
where some old video fragments are displayed as not updated in time for some
reason; for example, noise filter for VGA is setting too large.
• Soft Keyboard
Opens up the Menu for the Soft-Keyboard.
• Show
Pops up the Soft-Keyboard. The Soft-Keyboard is necessary in case your host
system runs a completely different language and country mapping than your
administration machine.
• Mapping
Used for choosing the specific language and country mapping of the
Soft-Keyboard.
Figure 5-11. Soft Keyboard
25 / 77
KVM over IP Module