Austin Hughes Electronics Cyberview D-117 User Manual page 27

• Local Keyboard
Used to change the language mapping of your browser machine running the
Remote Console Applet. Normally, the applet determines the correct value
automatically. However, depending on your particular JVM and your browser
settings this is not always possible. A typical example is a German localized
system that uses an US-English keyboard mapping. In this case you have to
change the Local Keyboard setting to the right language, manually.
• Hotkeys
Opens a list of hotkeys defined before. Choose one entry, the command will be
sent to the host system.
A confirmation dialog can be added that will be displayed before sending the
selected command to the remote host. Select "OK" to execute the command on
the remote host.
Figure 5-13. Remote Console Confirmation Dialog
• Encoding
These options are used to adjust the encoding level in terms of compression and
color depth. They are only available unless "Transmission Encoding" is
Figure 5-12. Soft Keyboard Mapping
26 / 77
KVM over IP Module