Main Window; Remote Console Control Bar - Austin Hughes Electronics Cyberview D-117 User Manual

connection. This is because today's web proxies are not capable of relaying the RFB
protocol.
In case of problems, please consult your network administrator in order to provide an
appropriate networking environment.

5.4 Main Window

Starting the Remote Console opens an additional window. It displays the screen
content of your host system. The Remote Console will behave exactly in the same way
as if you were sitting locally in front of the screen of your remote system. That means
keyboard and mouse can be used in the usual way. However, be aware of the fact that
the remote system will react to keyboard and mouse actions with a slight delay. The
delay depends on the bandwidth of the link to which you use to connect to the IP-KVM
switch.
With respect to the keyboard, the very exact remote representation might lead to some
confusion as your local keyboard changes its keyboard layout according to the remote
host system. If you use a German administration system, and your host system uses a
US English keyboard layout, for instance, special keys on the German keyboard will
not work as expected. Instead, the keys will result in their US English counterpart. You
can circumvent such problems by adjusting the keyboard of your remote system to the
same mapping as your local one.
The Remote Console window always tries to show the remote screen with its optimal
size. That means it will adapt its size to the size of the remote screen initially and after
the screen resolution of the remote screen has been changed. However, you can
always resize the Remote Console window in your local window system as usual.
In difference to the remote host system, the Remote Console window on your
local window system is just one window among others. In order to make
keyboard and mouse work, your Remote Console window must have the local
input focus.

5.4.1 Remote Console Control Bar

The upper part of the Remote Console window contains a control bar. Using its
elements you can see the state of the Remote Console and adjust the local Remote
Console settings. A description for each control follows.
Warning
Figure 5-5. Remote Console Control Bar
20 / 77
KVM over IP Module