Atf Strainer, Removing And Installing - Volkswagen Golf 2015 Repair Manual

Golf 2015 ➤ , Golf Variant 2015 ➤
Automatic Transmission - Edition 11.2014
1.2

ATF Strainer, Removing and Installing

Removing
– Remove the ATF pan. Refer to
⇒ 1.1 Oil Pan, Removing and Installing , page 84
– Remove the bolts -arrows- from the ATF strainer.
– Remove the ATF strainer -A- from the valve body.
Installing
– Lightly coat the seals on the ATF strainer suction collar with
ATF.
– Replace the ATF strainer if the seals are loose or faulty.
– Mount the ATF strainer -A- on the valve body and tighten the
bolts -arrows-. For the correct tightening specification. Refer
to ⇒ page 89 .
– Install the ATF pan. Refer to
⇒ 1.1 Oil Pan, Removing and Installing , page 84
– Fill the ATF and check the level. Refer to
⇒ 7 Automatic Transmission Fluid , page 73
Tightening Specifications
♦ Refer to ⇒ 2.1 Overview - Valve Body , page 87
86
Rep. Gr.38 - Gears, Hydraulic Controls
.
.
.