– Insert the Engine Support Bridge - Engine Support 29 -
10-222A/29- between the fender bolting edge and the fender
bolting plate underneath it on both sides of the vehicle.
♦ Engine Support Bridge - Engine Support 29 - 10-222A/29- in‐
stallation position:
L = -1- Adapter is installed on the right side of the vehicle
( Adapter locks in the hole on the fender).
R (not illustrated here), Adapter is installed on the left side of
the vehicle.
The arrow -2- on the Engine Support Bridge - Engine Support 29
- 10-222A/29- always points in the direction of travel.
– Slide the Engine Support Bridge - Engine Support 18 -
10-222A/18- and two Engine Support - Basic Set Movable
Joint - T40091/3- onto the Engine Support Bridge - 10-222A- .
– Tighten the Engine Support Bridge - 10-222A- on the Engine
Support Bridge - Engine Support 29 - 10-222A/29- .
-A- = Engine Support Brackets - T40093/3-6- (⇒ next illustration)
Golf 2015 ➤ , Golf Variant 2015 ➤
Automatic Transmission - Edition 11.2014
3. Transmission, Removing and Installing
59