Volkswagen Golf 2015 Repair Manual page 57

– Place the Transmission Support - 3282- on the Engine and
Gearbox Jack - VAS6931- or Engine/Gearbox Jack -
VAG1383A- .
Install the Transmission Support - 3282- as follows with the
Mounting Element on the transmission:
• The Engine and Gearbox Jack with Transmission Support is
positioned under the transmission -1- so that the spindle
-arrow A- points forward in the direction of travel.
• The spindle -arrow B- points in the direction of travel to the left.
• The Mounts -2- are positioned as shown in the illustration in
the oil pan surrounding groove.
• The Pins -3- lock in the recess on the front right of the trans‐
mission.
– Install the Transmission Support - Pins 29 - 3282/29- into the
rear hole for the pendulum support bolt on the transmission
-1-.
– Support the transmission with the Engine and Gearbox Jack
by carefully lifting.
– Remove the last bolts for the -arrow A- and -arrow B- for the
engine to the transmission. These bolts can be removed with
for example the Socket - Xzn 14 - T10061- .
– While pressing the torque converter off the drive plate, sepa‐
rate the transmission from the engine.
– Guide the transmission past the subframe when lowering it.
Adjust the Transmission Support - 3282- slightly, if necessary.
Golf 2015 ➤ , Golf Variant 2015 ➤
Automatic Transmission - Edition 11.2014
3. Transmission, Removing and Installing
53