– Remove the multifunction switch -4- and the washers
-2 and 3- from the selector shaft -6-.
Multifunction Transmission Range Switch - F125- Installing
Install in reverse order of removal. Note the following:
– Attach the lever -4- to the selector shaft -6-.
– Install the bolts -5- for the Multifunction Transmission Range
Switch - F125- hand-tight.
– Bend back the hooks on the lock washer -2-.
– Mount the washer -3- on the selector shaft -6-.
– Install the washer -2- with the hooks facing up.
– Install the washer -2- with the long narrow guide into the long
narrow depressions in the selector shaft -6-.
– Tighten the nuts -1- to the tightening specification.
– Tighten the nut -1- and secure it by bending the hook on the
washer -2- upward.
Note
Replace the lock washer if several of the hooks break off while
♦
being bent.
Before installing the gearshift lever on the gearshift shaft, ad‐
♦
just the Multifunction Transmission Range Switch - F125- .
Refer to
⇒ 2.10 Multifunction Transmission Range Switch, Adjusting ,
page 40
.
Golf 2015 ➤ , Golf Variant 2015 ➤
Automatic Transmission - Edition 11.2014
39
2. Selector Mechanism