NovaStar VX4S-N User Manual page 15

Redundancy
Set this controller as primary or backup mode.
Advanced Attribute
PIP
Redundancy
Advanced Attr
Presettings
VGA Auto ADJ: Sampling parameters of VGA input signal are automatically adjusted so
ƒ
that the VGA picture is clear and complete. Select this menu and then press the knob
once and perform VGA automatic adjustment once.
ADC calibration: when analog signal accesses, processors that are not calibrated
ƒ
by ADC may have defects such as color cast or picture dark. The VX4S-N can
automatically make ADC calibration based on input analog signal (including CVBS and
VGA) to solve the problems above. Select this menu and then press the knob once and
perform ADC calibration once.
Video Synchronization: allow that the input and output of the VX4S-N are synchronous.
ƒ
Go Homepage(s): The time period during which the system stops at current interface
ƒ
and then automatically returns to home screen when there is no operation. The system
default value is 60s.
Presettings
Save the current configuration parameters as Presettings. The Presettings can be directly
loaded next time, and 10 Presettings are saved by default.
Custom Button
Fn Settings. The functions of custom button include Black Out, Freeze、VGA Auto ADJ、
Video Synchronization. Press Fn key to directly conduct the function switch.
Audio Settings
Control the enabling /disenabling of Audio, volume and Audio mode.
For example, when using the audios input via Audio In port, it is required to enable audios
first and then select the Audio mode to be fixed; when using the Audio from HDMI, set the
Audio mode to be accompanied after enabling audios and then switch source to HDMI, and
the Audio we hear comes from HDMI.
Fn Settings
Audio Settings
Display Control
Inputs Backup
V X 4 S - N U s e r M an u a l
-12-
VGA Auto ADJ
ADC Calibration
Video Synchronization
Go Homepage（s）
Audio
Volume
Audio Mode
Enable
60
Enable
100