NovaStar VX4S-N User Manual page 16

Display Control
Fn Settings
Audio Settings
Display Control
Inputs Backup
Normal: Normally display. Blank Out: The display is blank.
ƒ
Freeze: The current play lists are frozen.
ƒ
Testing Pattern: There are eight kinds of testing screens in total, including pure color
ƒ
and lines.
Image Settings
ƒ
Contrast, Saturation, Hue, Color Temperature, Red, Green, Blue and Gamma value are set
according to the requirements. After they are adjusted to satisfaction, the parameters should
be saved.
Switching Effect:Set the effects when switching screens, including Quick switch, Fade,
ƒ
Shrink Center, Shrink Left Top, Zoom Center, Zoom Left Top and turning off. After
selecting the desired effect, it will take effect after pressing the knob.
Tips: When enabling PIP function, the switching effect will automatically disappear. Only when
PIP function is turned off, the special effect function of channel switching can take effect.
Inputs Backup
To specify backup for input source and automatically switch to backup source if the signal of
input source has faults, which makes it more reliable.
Fn Settings
Audio Settings
Display Control
Inputs Backup
Indicating that DP has been set as the backup of HDMI and main input
HDMI DP
source (which cannot be changed) is in left side of the arrow while backup (which can be
changed) is in the right side;
Both main input source and backup can be customized in Custom mode.
Output Resolution
This function can be used to set the the output resolution of monitoring. Users can set the
function according to actual use and choose either Reset Resolution or Custom.
Output Resolution
Cabinet Settings
OLED Brightness
Hardware Version
V X 4S - N U s e r M a nu a l
13
V1.3.0.0
-13-
Normal
Black out
Freeze
Test Pattern
Image Settings
Switching Effect
Backup
Backup 1 HDMI
Backup 2 VGA
Backup 3 CVBS
Preset Resolution
Custom Resolution
Enable
DP
SDI
VGA