Signal Connections - NovaStar VX4S-N User Manual

Output
Ethernet port
DVI OUT
Control
ETHERNET
USB (Type-B)
USB (Type-A)

2 Signal Connections

Connect the required hardware devices according to the previous connector descriptions.
If multiple VX4S-N units are used, please connect the units according to the following
diagram.
V X 4S - N U s e r M a nu a l
1 4 ports load up to 2,300,000 pixels.
• Max. width: 3840 pixels
• Max. height: 1920 pixels
Only Ethernet port 1 can be used for audio output. When the
multifunction card is used for audio parsing, the card must be
connected to the Ethernet port 1.
1 A connector for monitoring the output images
1 • Connect to the control PC for communication.
• Connect to the network.
1 • Connect to the control PC for device control.
• Input connector to link another device
1 Output connector to link another device
Signal connections
Multiple device connections
-3-