1 Appearance
Front Panel
Button
Power switch
LCD screen
Knob
ESC button
Control buttons
Input source buttons
Function buttons
USB (Type-B)
V X 4S - N U s e r M a nu a l
Description
Power on or power off the device.
Display the device status, menus, submenus and messages.
•
Rotate the knob to select a menu item or adjust the parameter
value.
•
Press the knob to confirm the setting or operation.
Exit the current menu or cancel the operation.
•
PIP: Enable or disable the PIP function.
−
On: PIP enabled
−
Off: PIP disabled
•
SCALE: Enable or disable the image scaling function.
−
On: Image scaling function enabled
−
Off: Image scaling function disabled
•
MODE: A shortcut button for loading or saving the preset
•
TEST: Open or close the test pattern.
−
On: Open the test pattern.
−
Off: Close the test pattern.
Switch the layer input source and display the input source status.
•
On: The input source is connected and being used.
•
Flashing: The input source is not connected, but already used.
•
Off: The input source is not used.
•
TAKE: When the PIP function is enabled, press this button to
switch between the main layer and PIP.
•
FN: An assignable button
Connect to the control PC.
-1-