Glossary Of Terms & Abbreviations - LAUNCH TECH X-431 PRO5 User Manual

LAUNCH
15 Glossary of Terms & Abbreviations
ABS – Anti-Lock Brake System
ADAS -- Advanced Driver Assistance Systems
AFS – Adaptive Front-lighting System
CAN – Controller Area Network
Communication Protocol – Allows different systems and sensors in a vehicle to communicate.
There are currently five Protocols:
• CAN Bus
• J1850 VPW
• ISO 9141-2
• J1850 PWM
• ISO 14230 KWP
DC – Direct Current
DLC – Data Link Connector
The 16-cavity connector on the vehicle that allows communication between the computer system and the
diagnostic tool.
DPF – Diesel Particulate Filter
DTC – Diagnostic Trouble Code
A code stored in the computer system's memory, which helps to identify the fault condition that is causing the MIL
to activate.
Drive Cycle – A set of driving procedures that, when met, provide the Enabling Criteria for the I/M Monitors to run
and complete their diagnostic tests.
Freeze Frame Data – A digital representation of engine and/or emissions system conditions present when a fault
code was recorded.
–
A DTC that applies to all OBD2 compliant vehicles.
Generic Code
I/M – Instant Messaging.
I/M Readiness – An indication of whether or not a vehicle's emissions-related system are operating properly and are
ready for Inspection and Maintenance testing.
LCD – Liquid Crystal Display
LED – Light Emitting Diode
Manufacturer Specific Code – A DTC that applies only to OBD II-compliant vehicles made by a specific
manufacturer.
MIL – Malfunction Indicator Lamp
The vehicle's "Check Engine" warning light that activates when a DTC is stored.
68
X-431 PRO5 User Manual