LAUNCH TECH X-431 EuroPro5 User Manual
  1. Manuals
  2. Brands
  3. LAUNCH TECH Manuals
  4. Diagnostic Equipment
  5. X-431 EuroPro5
  6. User manual

LAUNCH TECH X-431 EuroPro5 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Version: V1.00.000
Revised date: 06-016-2020
Statement: LAUNCH owns the complete intellectual property rights for the
software used by this product. For any reverse engineering or cracking actions
against the software, LAUNCH will block the use of this product and reserve the
right to pursue their legal liabilities.

Advertisement

Table of Contents
loading

Related Manuals for LAUNCH TECH X-431 EuroPro5

Summary of Contents for LAUNCH TECH X-431 EuroPro5

  • Page 1 Version: V1.00.000 Revised date: 06-016-2020 Statement: LAUNCH owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software, LAUNCH will block the use of this product and reserve the right to pursue their legal liabilities.
  • Page 2 X-431 EuroPro5 User Manual Copyright Information Copyright © 2020 by LAUNCH TECH CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH.
  • Page 3 LAUNCH X-431 EuroPro5 User Manual Important Safety Precautions Important: To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the product. Never collide, throw, or puncture the tool, and avoid falling, extruding and bending it.
  • Page 4 LAUNCH X-431 EuroPro5 User Manual the engine is running. Put blocks in front of the drive wheels and never leave the vehicle unattended while testing. Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clear the outside of the equipment as necessary.

  • Page 5: Table Of Contents

    LAUNCH X-431 EuroPro5 User Manual TABLE OF CONTENTS 1 INTRODUCTION ....................1 1.1 P ..................1 RODUCT ROFILE 1.2 F ....................1 EATURES 1.3 C & C ............... 2 OMPONENTS ONTROLS 1.3.1 Display tablet ..................2 1.3.2 VCI ....................4 1.4 T...
  • Page 6 LAUNCH X-431 EuroPro5 User Manual 4.2.2 Job menu ..................14 4.2.3 Diagnostics toolbar ................. 16 4.3 C ..................17 ONNECTIONS 4.3.1 Preparation ..................17 4.3.2 DLC location ................... 17 4.3.3 Vehicle connection ................18 5 DIAGNOSIS ....................20 5.1 I ................
  • Page 7 LAUNCH X-431 EuroPro5 User Manual 6.10 D (DPF) R ......64 IESEL ARTICULATE ILTER EGENERATION 6.11 E ..........65 LECTRONIC HROTTLE OSITION ESET 6.12 G ................65 EARBOX ATCHING 6.13 AFS (A ........ 65 DAPTIVE RONT LIGHTING YSTEM ESET 6.14 S ...............
  • Page 8 LAUNCH X-431 EuroPro5 User Manual 9.12 D ............. 81 IAGNOSTIC OFTWARE LEAR 10 VIDEOSCOPE ..................... 82 10.1 I ..................82 NTRODUCTION 10.2 C & O ............... 82 ONNECTIONS PERATIONS 11 SYNCHRONIZATION ................... 84 12 FAQ ......................86...

  • Page 9: Introduction

    X-431 EuroPro5 User Manual 1 Introduction 1.1 Product Profile X-431 EuroPro5 is a powerful Android-based diagnostic tool. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.

  • Page 10: Components & Controls

    LAUNCH X-431 EuroPro5 User Manual Vehicle Coverage: Quick dial to view the vehicle models that the tool covers. ADAS calibration: Optional. This function needs to be activated before normal use and only works with the LAUNCH-specific ADAS calibration tool. 1.3 Components & Controls There are two main components to the diagnostic system: Display Tablet –...
  • Page 11 LAUNCH X-431 EuroPro5 User Manual LCD Screen Indicates the test results. In Off mode, press it for 3 seconds to turn the tablet on. In On mode: POWER Key • Press and hold it for 3 seconds to turn it off or restart it.

  • Page 12: Vci

    LAUNCH X-431 EuroPro5 User Manual 1.3.2 VCI The VCI works as a vehicle communication interface device, which is used to connect to the vehicle’s DLC (Data Link Connector) socket directly or via OBD II extension cable to read the vehicle data and then send it to the tablet via Bluetooth.

  • Page 13: Technical Parameters

    LAUNCH X-431 EuroPro5 User Manual 1.4 Technical Parameters 1.4.1 Display tablet Operating system Android Memory Storage 64GB 10.1 inch FHD IPS capacitive touch screen with Screen a resolution of 1920 x 1200 pixels Front-facing 5.0MP + Rear-facing 8.0MP Camera camera Wi-Fi (802.11a/b/g/n/ac)

  • Page 14: Package List

    LAUNCH X-431 EuroPro5 User Manual 1.5 Package List Common accessories are same, but for different destinations, the accessories (such as diagnostic software, testing connectors) may vary. Please consult from the local agency or check the package list supplied with this tool together.

  • Page 15: Preparations

    LAUNCH X-431 EuroPro5 User Manual 2 Preparations 2.1 Charging the Tablet 1. Plug one end of the included charging port of the tool, and the other end to the power adaptor. 2. Connect the other end to the AC outlet.

  • Page 16: Tips On Finger Operations

    LAUNCH X-431 EuroPro5 User Manual 2.4 Tips on Finger Operations Single-tap: To select an item or launch a program. Double-tap: To zoom in so that the text on a webpage appears in a column that fits your device’s screen. Long press: Tap and hold on the current interface or area until a contextual menu pops up on the screen, and then release it.

  • Page 17: Change System Language

    LAUNCH X-431 EuroPro5 User Manual 2.7 Change System Language The tool supports multiple system languages. To change the language of the tool, please do the following: 1. On the home screen, tap Settings -> System -> Language & input ->...

  • Page 18: Network Setup

    LAUNCH X-431 EuroPro5 User Manual 3 Network Setup *Note: If you don’t need to use Wi-Fi for a while, you can turn it off to conserve battery life. The tablet has built-in Wi-Fi that can be used to get online. Once you’re online, you can register your tool, surf the Internet, get apps, send email, launch the remote diagnosis, and check for software updates etc.

  • Page 19: Initial Use

    LAUNCH X-431 EuroPro5 User Manual 4 Initial Use 4.1 Diagnosis Flowchart For new users, please follow the operation chart shown as below to get familiar with and start using this tool. 4.2 Register & Update 4.2.1 User registration For initial use, the registration is the necessary first procedure to activate the tool.
  • Page 20 LAUNCH X-431 EuroPro5 User Manual (If you are a new user, follow to proceed.) (If you have registered to be a member, go to to login the system directly.) (In case you forgot password, refer to to reset a new password.) A.
  • Page 21 LAUNCH X-431 EuroPro5 User Manual Input the Serial Number and Activation Code, which can be found in the password envelope. Product SN Product SN Activation code *Note: To exit and activate it later, tap Skip . In this case, please activate the VCI module by tapping User Info ->...

  • Page 22: Job Menu

    LAUNCH X-431 EuroPro5 User Manual *Note: In process of download, please make sure it is properly connected to the WLAN network. It may take several minutes to finish it, please be patient to wait. B. If you have registered to be a member, input your name and password, and then tap the Login button to enter the main menu screen directly.
  • Page 23 LAUNCH X-431 EuroPro5 User Manual Diagnose cloud server to perform quick test via reading VIN, which provides a perfect solution to various defects resulting from step-by-step menu selection. In addition, user can also check the historical repair records online through this module.

  • Page 24: Diagnostics Toolbar

    LAUNCH X-431 EuroPro5 User Manual of the database is an extensive knowledge database, developed by compiling and analyzing years of real world vehicle service data. *Note: Contact the local dealer for getting the login account. To manage my connector, my reports, change...

  • Page 25: Connections

    LAUNCH X-431 EuroPro5 User Manual configured separately. For details on printer setting, refer to Chapter 9.11.3. Exit To exit the diagnostic application. 4.3 Connections 4.3.1 Preparation Normal testing conditions Turn on the vehicle power supply. Vehicle battery voltage range should be 9-18.

  • Page 26: Vehicle Connection

    LAUNCH X-431 EuroPro5 User Manual 4.3.3 Vehicle connection The method used to connect the VCI device to a vehicle’s DLC depends on the vehicle’s configuration as follows: A vehicle equipped with an OBD II management system supplies both communication and 12V power through a standardized DLC.
  • Page 27 LAUNCH X-431 EuroPro5 User Manual B. Battery Clamps Cable: Connect one end of the battery clamps cable to vehicle’s battery, and the other end to the power jack of OBD I adaptor.

  • Page 28: Diagnosis

    LAUNCH X-431 EuroPro5 User Manual 5 Diagnosis 5.1 Intelligent Diagnose Through simple Bluetooth communication between the display tablet and the VCI, you can easily get the VIN (Vehicle Identification Number) information of the currently identified vehicle. Once the VIN is successfully identified, the system will retrieve it from the remote server and then guide you to vehicle information page without the necessity of step-by-step manual menu selection.
  • Page 29 LAUNCH X-431 EuroPro5 User Manual If the VCI was once used with other devices, you need to cancel the pairing of the VCI first via either one of the following ways: • On the Android’s home screen, tap Settings -> Bluetooth -> Choose the desired VCI from the Paired list.
  • Page 30 LAUNCH X-431 EuroPro5 User Manual function selection screen. Choose the desired one to start a new diagnostic session. • Tap Scan History to view its historical repair record. If there are records available, it will be listed on the screen in sequence of date. If no records exist, the screen will show “No Record.”...
  • Page 31 LAUNCH X-431 EuroPro5 User Manual • Tap to launch the VIN recognition module. Place the VIN inside the viewfinder rectangle to scan it. The most recognizable location for this number is in the top left corner on the vehicle’s dashboard. Other locations include the driver’s door or post, and the firewall under the hood.

  • Page 32: Local Diagnose

    LAUNCH X-431 EuroPro5 User Manual • If the VIN scanned is incorrect, tap the result field to modify it and then tap • To scan it again, tap REPEAT. If the VIN exists on the remote server, the system will enter the diagnostic function selection screen.
  • Page 33 LAUNCH X-431 EuroPro5 User Manual In this case, camera scan and enter VIN are available. A. Camera Scan: In this mode, the VCI should be connected to the vehicle’s DLC first, and then a Bluetooth communication should be established between the tablet and the VCI.
  • Page 34 LAUNCH X-431 EuroPro5 User Manual • Tap to turn the camera flash on. • Tap to choose it from the record list if the VIN of the vehicle has been scanned before. • Tap to input the VIN manually if the tablet has failed to identify the VIN of the vehicle.
  • Page 35 LAUNCH X-431 EuroPro5 User Manual characters. VIN characters may be capital letters A through Z and numbers 1 through 0; however, the letters I, O and Q are never used in order to avoid mistakes of misreading. No signs or spaces are allowed in the VIN.
  • Page 36 LAUNCH X-431 EuroPro5 User Manual On-screen Buttons: Vehicle Coverage: Tap to view the vehicle models that the current diagnostic software covers. What’s new: Tap to view the optimized items and enhancements. Introduction: Tap to check the software function list. Note: Tap to read some precautions on using the current diagnostic software.
  • Page 37 LAUNCH X-431 EuroPro5 User Manual 3). Read vehicle information: After reading the vehicle information, double check if the vehicle information is correct or not. If yes, tap Yes to continue. 4). Select test item: Select the desired test item to proceed.

  • Page 38: Health Report (Quick Test)

    LAUNCH X-431 EuroPro5 User Manual 5). Turn the ignition key to ON: Set the ignition switch to on. 5.2.1 Health Report (Quick Test) This function varies from vehicle to vehicle. It enables you to quickly access all the electronic control units of the vehicle and generate a detailed report about vehicle health.
  • Page 39 LAUNCH X-431 EuroPro5 User Manual The tested system with fault code appears in red and the system with OK displays in black (normally). *Note: Diagnostic Trouble Codes or Fault Codes can be used to identify which engine systems or components that are malfunctioning. Never replace a part based only on the DTC definition.
  • Page 40 LAUNCH X-431 EuroPro5 User Manual *Note: Diagnostic report is classified into three categories: Pre-Repair report, Post-Repair report and Diagnostic Scan. No matter which type you saved the report as, the report type will be appended as a tag on the upper right corner of the diagnostic report for easier identification.
  • Page 41 LAUNCH X-431 EuroPro5 User Manual *Note: For workshop information, tap the input box to enter it. Alternatively you can also set it in User Info -> Settings -> Shop Information . Once you configured the information, it will be automatically generated every time you saved the diagnostic report.

  • Page 42: System Scan

    LAUNCH X-431 EuroPro5 User Manual comparison of the pre- and post- repair reports, you can easily identify which DTCs are cleared and which remain unfixed. • Post indicates DTC status of post-repair. • Pre indicates DTC status of pre-repair. *Note: Before performing this function, please make sure that: •...

  • Page 43: System Selection

    LAUNCH X-431 EuroPro5 User Manual Tap the desired system to go to the diagnostic function selection screen. For detailed operations on diagnostic function, please refer to Chapter 5.2.3. 5.2.3 System Selection This option allows you to manually select the test system and function step by step.
  • Page 44 LAUNCH X-431 EuroPro5 User Manual Note: Different vehicle has different diagnostic menus. A. Version Information This function is used to read the version information of system mode, vehicle VIN, software and ECU. B. Read Fault Code This function displays the detailed information of DTC records retrieved from the vehicle’s control system.
  • Page 45 LAUNCH X-431 EuroPro5 User Manual On-screen Buttons: Freeze Frame: When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze frame data includes a snapshot of critical parameter values at the time the DTC is set.
  • Page 46 LAUNCH X-431 EuroPro5 User Manual Tap YES, the system will automatically delete the currently existing trouble code. *Note: After clearing, you should retrieve trouble codes once more or turn ignition on and retrieve codes again. If there are still some trouble codes in the system, please troubleshoot the code using a factory diagnosis guide, then clear the code and recheck.
  • Page 47 LAUNCH X-431 EuroPro5 User Manual On-screen Buttons: Select Page: Tap to select all items of the current page. Select All: Tap to select all items. To select certain data stream item, just check the box before the item name. Unselect: Tap to deselect all data stream items.
  • Page 48 LAUNCH X-431 EuroPro5 User Manual displays in blue (normal mode). 2. The indicator 1/X shown on the bottom of the screen stands for the current page/total page number. Swipe the screen from the right/left to advance/return to the next/previous page.
  • Page 49 LAUNCH X-431 EuroPro5 User Manual • Combine: This option is mostly used in graph merge status for data comparison. In this case, different items are marked in different colors (maximum 4 items can be displayed on the same screen simultaneously).
  • Page 50 LAUNCH X-431 EuroPro5 User Manual Compare Sample: Tap to select the sample DS file. All the values you customized and saved in process of DS sampling will be imported into the Standard Range (See below) column for your comparison. *Note: Before executing this function, you have to sample the values of data stream...
  • Page 51 LAUNCH X-431 EuroPro5 User Manual Report: Tap to save the current data in text format. All reports are saved in User Info -> My Report -> Health Reports. For details on report operations, please refer to Chapter 9.1. Record: Tap to start recording diagnostic data. Recorded live data can serve as valuable information to help you in troubleshooting of vehicle problems.
  • Page 52 LAUNCH X-431 EuroPro5 User Manual data stream items and save it as DS sample file. Each time you run the data stream items, you can call out the corresponding sample data to overwrite the current standard range. Tap it to start recording the sample data (*Note: Only data stream items with...
  • Page 53 LAUNCH X-431 EuroPro5 User Manual E. Actuation Test This option is used to access vehicle-specific subsystem and component tests. Available test vary by vehicle manufacturer, year, and model. During the actuation test, the display tablet outputs commands to the ECU in...
  • Page 54 LAUNCH X-431 EuroPro5 User Manual Each time when an operation is successfully executed, “Completed” displays. F. Special Function In addition to amazing & powerful diagnostic function, the tool also features various reset functions, which varies from vehicle to vehicle.

  • Page 55: Remote Diagnose

    LAUNCH X-431 EuroPro5 User Manual 5.3 Remote Diagnose This option aims to help repair shops or technicians launch instant messaging and remote diagnosis, making the repair job getting fixed faster. Tap “Remote Diagnose” on the Job menu, the screen appears blank by default.

  • Page 56: Add Friends

    LAUNCH X-431 EuroPro5 User Manual Contact tab Tap to enter the friend list. Tap to slide the switch to ON, the tool keeps online and Remote becomes accessible on the web client. In this case, inform switch the technician of your product S/N, and he/she will control your device remotely.

  • Page 57: Start Instant Messaging

    LAUNCH X-431 EuroPro5 User Manual Tap Add friend, a dialog box pops up: Tap CONFIRM to send your request. Once the partner receives the request, a beep will sound. Tap the Message tab: • Once the partner agreed your request, he/she will automatically be listed in the Contact tab.
  • Page 58 LAUNCH X-431 EuroPro5 User Manual Tap the input field and use the on-screen keyboard to enter the text message, and then tap Send to send it. to send the voice message. to send the emoj. to call out more function options.

  • Page 59: Launch Remote Diagnosis (Device-To-Device)

    5.3.4 Launch Remote Diagnosis (Device-To-Device) The tool is allowed to initiate remote diagnosis with other diagnostic tools (including but not limited to the X-431 EuroPro5 of Launch family, which are equipped with this module. * Note: Before performing this operation, please make sure the following no matter which side sends the remote request: Turn on the vehicle power supply.
  • Page 60 LAUNCH X-431 EuroPro5 User Manual If you need support, just use this option to invite a technician to perform a remote control on your tool. *Notes: Remote diagnosis has the same diagnostic steps as manual diagnosis. Invite remote In process of remote diagnosis, tap the...

  • Page 61: Launch Remote Diagnosis (Device-To-Pc)

    LAUNCH X-431 EuroPro5 User Manual Cancel To cancel this operation. 5.3.5 Launch Remote Diagnosis (Device-To-PC) Except that the remote diagnosis can be done between different Launch’s diagnostic tools that come loaded with the module, user also can ask for remote...
  • Page 62 LAUNCH X-431 EuroPro5 User Manual Tap the Remote tab, the screen displays as follows:...
  • Page 63 LAUNCH X-431 EuroPro5 User Manual 1. Slide the switch Allow device to be connected to the WEB client remote diagnostic device to ON so that the partner can find and connect to this device while using the PC. 2. Notify the partner of the PC client website http://remote.x431.com. When the...

  • Page 64: Feedback

    LAUNCH X-431 EuroPro5 User Manual 4. Tell the partner to check the box Serial number and enter the Serial Number provided by you, and then tap Start remote diagnosis to control your device remotely. In process of remote diagnosis, please note the following things: 1) You are not suggested to execute any actions.
  • Page 65 LAUNCH X-431 EuroPro5 User Manual Tap OK, the following 3 options will be displayed on the left column of the screen. A. Feedback Tap certain tested vehicle model to enter the feedback screen.

  • Page 66: Diagnostic History

    LAUNCH X-431 EuroPro5 User Manual 1) Tap Choose File to open the target folder and choose the desired diagnostic logs. 2) Choose the failure type and fill in the detailed failure description in the blank text box and telephone or email address. After inputting, tap Submit Result to send it to us.
  • Page 67 LAUNCH X-431 EuroPro5 User Manual • To delete certain diagnostic history, select it and then tap Delete. To delete all historical records, tap Select All and then tap Delete. • Tap Quick Access to directly navigate to the function selection page of last...

  • Page 68: Special (Reset) Function

    LAUNCH X-431 EuroPro5 User Manual 6 Special (Reset) Function Except that the special functions can be performed from the diagnostic menus (See Chapter 5.2.3) of certain vehicle model, this module provides an easy dial to quickly access the special functions.

  • Page 69: Oil Reset Service

    LAUNCH X-431 EuroPro5 User Manual 6.1 Oil Reset Service This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. This function can be performed in the following cases: 1.

  • Page 70: Steering Angle Calibration

    LAUNCH X-431 EuroPro5 User Manual 6.3 Steering Angle Calibration To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.

  • Page 71: Immo Service

    LAUNCH X-431 EuroPro5 User Manual learning is not performed for a car equipped with Delphi engine, the MIL turns on after the engine is started. The diagnostic device detects the DTC P1336 'tooth not learned'. In this case, you must use the diagnostic device to perform tooth learning for the car.

  • Page 72: Battery Maintenance System Reset

    LAUNCH X-431 EuroPro5 User Manual injection quantity. After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection. 6.9 Battery Maintenance System Reset...

  • Page 73: Electronic Throttle Position Reset

    LAUNCH X-431 EuroPro5 User Manual 6.11 Electronic Throttle Position Reset This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.

  • Page 74: Software Update

    LAUNCH X-431 EuroPro5 User Manual 7 Software Update This module allows you to update the diagnostic software & App and set frequently used software. If you did not download the software in process of product registration or a pop-up message prompting you that some new software can be updated, you may use this option to download it or keep it synchronized with the latest version.

  • Page 75: Renew Subscription

    LAUNCH X-431 EuroPro5 User Manual Tap Common Software to create a frequently used software list. on the right edge of the screen, a pop-up window appears. Select the checkbox before the software name and tap Save, the software will be displayed in the Common software list. Next time you want to update it, just go to Common software.
  • Page 76 LAUNCH X-431 EuroPro5 User Manual 2. Select Subscription Renewal Card. 3. Input the 24-digit pin code of Subscription Renewal Card and then tap Submit to finish the renewal. 4. Go to update center to update the diagnostic software.

  • Page 77: Adas

    LAUNCH X-431 EuroPro5 User Manual 8 ADAS Advanced Driver Assistance Systems (ADAS) are electronic components in vehicles, which include a wide range of safety features for vehicles such as autonomous emergency braking (AEB), lane departure warning (LDW), lane keep assist, blind spot elimination, night vision cameras and adaptive lighting.
  • Page 78 LAUNCH X-431 EuroPro5 User Manual • ADAS Calibration: This option allows you to activate the ADAS function on this tool. • Product Introduction: A brief introduction of the X-431 ADAS PRO calibration tool. • Product Manual: The user manual of the X-431 ADAS PRO calibration tool is available for easy retrieval and reference.
  • Page 79 LAUNCH X-431 EuroPro5 User Manual 4. Now the ADAS function becomes accessible and is ready for use.

  • Page 80: User Info

    LAUNCH X-431 EuroPro5 User Manual 9 User Info This function allows users to manage personal information and VCI. 9.1 My Report This option is used to view, delete or share the saved reports. Tap My Report, there are total 3 options available.
  • Page 81 LAUNCH X-431 EuroPro5 User Manual • Select the desired report and then tap Delete to delete it. • To revise the filename of the report, tap Rename. If user records the running parameters while reading data stream, it will be saved as .x431 file and appear under Recorded Data tab.
  • Page 82 LAUNCH X-431 EuroPro5 User Manual On-screen Buttons: Graph – displays the parameters in waveform graphs. Value – this is the default mode which displays the parameters in texts and shows in list format. Combine – this option is mostly used in graph merge status for data comparison.

  • Page 83: Vci

    LAUNCH X-431 EuroPro5 User Manual 9.2 VCI This option allows you to manage all your activated VCI devices. If several VCI devices are activated on this tool, a list of VCIs will be displayed on the screen. Once you choose the VCI that belongs to other account, you have to log out, and then input the right account to continue.

  • Page 84: M Yorder

    LAUNCH X-431 EuroPro5 User Manual 9.7 My Order This item allows you to check the status of all your orders. 9.8 Subscription Renewal Card This item is used to check the status of the subscription renewal card. Input the 12-digit subscription renewal card number. Tap Search to get the search result.

  • Page 85: Units

    LAUNCH X-431 EuroPro5 User Manual information etc. 9.11.1 Units It is designed to configure the measurement unit. Metric System and English System are available. 9.11.2 Shop Information This option lets you define your print information. It mainly includes Workshop, Address, Telephone, Fax and License Plate.
  • Page 86 LAUNCH X-431 EuroPro5 User Manual A. If it is the first time you have operated this printer, please proceed the following: 1. For initial use, you are suggested to reset the printer: Press and hold [MODE] & [FEED] for 8 seconds, the following resetting command will be printed out:...
  • Page 87 LAUNCH X-431 EuroPro5 User Manual to Step 2 for details) and check whether the current device and the printer are on the same LAN. B. If you have configured the Wi-Fi printer to the LAN: 2. Tap Connect to Printer: a).
  • Page 88 LAUNCH X-431 EuroPro5 User Manual 5. Select All Printers -> Add printer and enable the installed printer service, the system starts searching for all available Wi-Fi printers of the brand. 6. Select the desired Wi-Fi printer from the list. If the chosen Wi-Fi printer hotspot is open, the tablet can connect it directly.

  • Page 89: Orientation

    LAUNCH X-431 EuroPro5 User Manual 9.11.4 Orientation The option is used to set the screen display orientation. 9.11.5 Clear Cache This option allows you to clear the App cache. Clearing the cache will restart the App. 9.11.6 About The software version information and disclaimer are included.

  • Page 90: Videoscope

    LAUNCH X-431 EuroPro5 User Manual 10 Videoscope 10.1 Introduction Automotive videoscope is mainly applied to those unseen parts of engine, fuel tank, braking system. While testing a vehicle system, engine is one of the main parts to be checked. To check if the internal of an engine is qualified or not or whether internal carbon deposit and damage exists in the engine or not, we can make full use of a videoscope to solve these questions.
  • Page 91 LAUNCH X-431 EuroPro5 User Manual Record button on the screen to start recording. Images are captured in .jpg format and videos are recorded in .avi or .mp4 format. All photographing and videos are saved in DCIM folder where users can...

  • Page 92: Synchronization

    LAUNCH X-431 EuroPro5 User Manual 11 Synchronization You can transfer media files, screenshots and APK between the PC and tablet. 1. Connect one end of the included charging/data cable to the charging/data I/O port of the tablet, and the other end to the USB port of the PC.
  • Page 93 LAUNCH X-431 EuroPro5 User Manual 4. Select the checkbox “Media device (MTP)” under the Connect as tab. 5. Now you can transfer files between the tablet and PC.

  • Page 94: Faq

    LAUNCH X-431 EuroPro5 User Manual 12 FAQ 1. How to save power? Please turn off the screen while the tool keeps idle. Set a shorter standby time. Decrease the brightness of the screen. If WLAN connection is not required, please turn it off.
  • Page 95 LAUNCH X-431 EuroPro5 User Manual 5. How to download the X-431 EuroPro5 App after resetting the tablet? *Note: Before registration, please make sure the network is properly connected. After the tablet has been successfully reset, follow the steps below to download the App: 1.
  • Page 96 Replaceable and optional parts can be ordered directly from your LAUNCH authorized tool supplier. Your order should include the following information: Order quantity Part number Part name Customer Service Any question during the operation, please call LAUNCH TECH. CO., LTD. Website: www.x431.com Phone: +86 755 8455 7891 Email: overseas.service@cnlaunch.com...
  • Page 97 Send the unit pre-paid to: Attn: Customer Service Department LAUNCH TECH. CO., LTD. Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian, Longgang, Shenzhen, Guangdong P.R.China, 518129...

Table of Contents