Network Setup; Connect To Awlan Network; Disconnect From Awlan Network - LAUNCH TECH X-431 PRO5 User Manual

LAUNCH

3 Network Setup

The tablet has built-in WLAN module that can be used to get online. Once you're online, you can register the tool,
surf the Internet, send email, launch the remote diagnosis, and check for software updates etc.
3.1 Connect to a WLAN Network
1. On the home screen, tap Settings -> Network & Internet -> WLAN.
2. Slide the WLAN switch to ON, the tablet starts searching for available wireless networks.
3. Select a wireless network,
 If the chosen network is open, the tablet will connect automatically.
 If the selected network is encrypted, a network password will need to be entered.
4. When Connected appears, it indicates the WLAN connection is complete.
*Note: When Wi-Fi is not required, this should be disabled to conserve battery power.
Once it is connected successfully, tap the desired network from the list to view its name, link speed, security type,
IP address etc.
When this tool is in range, it will connect to the previously linked network automatically.
3.2 Disconnect From a WLAN Network
1. On the home screen, tap Settings -> Network & Internet -> WLAN.
2. Tap the network with a Connected status, then tap Disconnect.
10
X-431 PRO5 User Manual