Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LAUNCH TECH Premium CRP 12 Series
Summary of Contents for LAUNCH TECH Premium CRP 12 Series
- Page 1 LAUNCH TECH USA CRP 12X Premium Manual...
- Page 2 CRP 12 Premium V1.00.000 2015-04-15 www.launchtechusa.com 1820 S. Milliken Ave Ontario, CA 91761 1-877-528-6249...
- Page 3 Copyright Information Copyright © 2015 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying and recording or otherwise, without the prior written permission of LAUNCH.
- Page 4 CRP 12 Premium General Notice Other product names used herein are for identification purposes only and may be trademarks of their respective owners. LAUNCH disclaims any and all rights in those marks. There is a possibility that this unit is inapplicable to some of the vehicle models or systems listed in the diagnosis section due to different countries, areas, and/or years.
- Page 5 CRP 12 Premium 1. Introduction The CRP12X Premium Series are specially developed by LAUNCH, which supports all 10 modes of OBD II test for a complete diagnosis. Featuring the 3.5” TFT color display, it enables users to read/clear DTCs, record, save and playback data in live graphic display. The CRP12X Premium Series are also very easy to use.
-
Page 6: General Information
CRP 12 Premium 2. General Information 2.1 On-Board Diagnostics (OBD) II The first generation of On-Board Diagnostics (OBD I) was developed by the California Air Resources Board (ARB) and implemented in 1988 to monitor some of the emission control components on vehicles. As technology evolved and the desire to improve the On-Board Diagnostic system increased, a new generation of On-Board Diagnostic system was developed. - Page 7 CRP 12 Premium Figure 2-2 2.4 OBD II Readiness Monitors An important part of a vehicle’s OBD II system is the Readiness Monitors, which are indicators used to find out if all of the emissions components have been evaluated by the OBD II system. They are running periodic tests on specific systems and components to ensure that they are performing within allowable limits.
-
Page 8: Obd Ii Definitions
CRP 12 Premium 2.6 OBD II Definitions Powertrain Control Module (PCM) — OBD II terminology for the on-board computer that controls engine and drive train. Malfunction Indicator Light (MIL) — Malfunction Indicator Light (Service Engine Soon, Check Engine) is a term used for the light on the instrument panel. -
Page 9: Product Descriptions
CRP 12 Premium 3. Product Descriptions 3.1 Outline of CRP12X Premium Figure 3-1 CRP129 Premium Front View Note: CRP12X Premium Series feature same appearance. Here only take CRP129 Premium example. Name Descriptions To connect to vehicle’s DLC (Data Link Connector) via OBD-16 connector diagnostic cable. - Page 10 CRP 12 Premium 4. Connection 4.1 Install TF card 1) Take out the TF card from package box. 2) Insert the TF card into the CRP12X Premium TF card slot perpendicularly. Make sure is fully inserted in the right place with the “micro” label facing upward.
- Page 11 CRP 12 Premium 5. Diagnose Select [Diagnose] in Main Menu and press [OK], the screen will display Monitor Status interface as following figure 5-1: Figure 5-1 5.1 OBDII/EOBD Diagnosing This option presents a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emission-related.
-
Page 12: System Diagnosing
CRP 12 Premium Before performing this function, make sure to retrieve and record the trouble codes. After clearing, you should retrieve trouble codes once more or turn ignition on and retrieve codes again. If there are still some trouble codes in the system, please troubleshoot the code using a factory diagnosis guide, then clear the code and recheck. - Page 13 CRP 12 Premium Select “Diagnose” Read version information Select Vehicle Read fault code Manufacturer Select test function Clear fault code Select Vehicle Model (Note: For different vechicles, vehicle make Read data stream selection may differ. Select test system Generally, we can choose a vehicle via make year.
-
Page 14: Dtc Library
CRP 12 Premium 6. Help This menu enables you to view tool information and OBD introduction. In main menu, select [Help] and press [OK] to enter Figure 6-1. Figure 6-1 6.1 DLC Location Information This option helps you to find the location of the vehicle’s DLC. 6.2 DTC Library In Figure 6-1, select [DTC Library] and press [OK] to enter the following screen. -
Page 15: Register & Update
CRP 12 Premium Figure 6-3 Note: You are strongly recommended to note down the Serial Number and Register Code in Figure 6-3 since these 2 pieces of information are required while registering your CRP12X Premium. Press [ESC] to return to the previous screen. 6.5 About OBD This option allows you to have a general knowledge of OBD. - Page 16 CRP 12 Premium Figure 1 (For CRP129 Premium) 2. Download and install the update tool and launch the program when installed. 3. You will be prompted to type in the Serial Number (located at the back of the tool). (Figure 2) Figure 2 4.
- Page 17 CRP 12 Premium Figure 5 8. This is the Register Code number for inputting into step 4. (Figure 6) Figure 6 (Return to step 4 and input the code and then proceed) 9. Install the TF card from the tool into the supplied USB TF card adapter and insert into USB port of CPU. 10.Reopen the CRP update Suite and select the updates you would like to perform or click [Select All] and click [Download].
- Page 18 Quantity Part number Item description Customer Service If you have any questions on the operation of the unit, please contact local dealer, or contact LAUNCH TECH. CO., LTD: Tel: 1-877-528-6249 E-mail: support@launchtechusa.com www.launchtechusa.com 1820 S. Milliken Ave Ontario, CA 91761...
- Page 19 CRP 12 Premium Statement: LAUNCH reserves the rights to make any change to product designs and specifications without notice. The actual object may differ a little from the descriptions in the manual in physical appearance, color and configuration. We have tried our best to make the descriptions and illustrations in the manual as accurate as possible, and defects are inevitable, if you have any question, please contact local dealer or after-sale service center of LAUNCH, LAUNCH does not bear any responsibility arising from misunderstandings.
- Page 20 LAUNCH TECH USA CRP 12X Premium Manual...