Feig Electronic OBID i-scan ID ISC PRHD102 Manual page 99

®
OBID i-scan
8.1.10. [0x29] Write DSFID
This command writes the DSFID code to one Transponders (or if using unaddressed mode and
there is more than 1 tag in field) codes to more than one transponder.
The supported ISO15693 Host commands depends on the different ISO15693 Transponder types,
which are described in chapter 9.2. Supported ISO Host commands for
REQUEST-DATA
6
0x29 MODE
RESPONSE-DATA (STATUS = 0x95)
7
ISO15693
ERROR
MODE:
Bit:
Function
ADR:
b000
b001
b010
UID:
Read-only serial number of the Transponder. The UID is required only in the addressed
mode.
DSFID:
Data Storage Format Identifier of the Transponder.
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS
= 0x95.
Note:
•
This command is only available for ISO15693 Transponders.
FEIG ELECTRONIC GmbH
7 (8...15)
UID
7 6
0 0
non-addressed
addressed
selected
Manual
8 / (16)
DSFID
5 4
0 0
Page 99 of 125
ID ISC.PRHD102
ISO15693 Transponders.
3 2 1
0 ADR
H71101-2e-ID-B.doc
0