Feig Electronic OBID i-scan ID ISC PRHD102 Manual page 24

®
OBID i-scan
1
BAUD : (HostInterface.Serial.Baudrate)
By means of this byte the baud rate of the asynchronous interface can be defined.
0x05: 4800 baud
0x06: 9600 baud
0x07: 19200 baud
0x08: 38400 baud
0x09: 57600 baud
0x0A: 115200 baud
0x0B: 230400 baud
Note:
•
Changing of BAUD only becomes effective after writing / saving configuration
block CFG1 to EEPROM and a reset of the Reader.
•
The Reader sets the baud rate to 38400 baud, if the user sets an invalid baudrate.
•
Not available by the USB-Reader
2
TRANS-FORM : (HostInterface.Serial...)
By means of this byte, several parameters for the data transmission format of the asyn-
chronous interface can be defined.
Bit:
Function:
P: (HostInterface.Serial.Parity)
Kind of Parity
b00:
b01:
b10:
b11:
D: (HostInterface.Serial.Databits)
Number of Data Bits
b0:
b1:
S: (HostInterface.Serial.Stopbits)
Number of Stop Bits
b0:
b1:
2
A reasonableness check is performed by writing this parameter to the Reader. If an error occurs the Read-
er answers with STATUS = 0x11.
FEIG ELECTRONIC GmbH
7 6 5
0 0 0
non Parity
even Parity
odd Parity
- do not use -
8 Data Bits
- do not use -
1 Stop Bit
- do not use –
Page 24 of 125
Manual
4 3
0 S
ID ISC.PRHD102
2 1 0
D P
H71101-2e-ID-B.doc