Feig Electronic OBID i-scan ID ISC PRHD102 Manual page 97

®
OBID i-scan
8.1.8. [0x27] Write AFI
This command writes a new AFI code to one Transponders (or if using unaddressed mode and
there is more than 1 tag in field) codes to more than one Transponder.
The supported ISO15693 Host commands depends on the different ISO15693 Transponder Types,
which are described in chapter 9.2. Supported ISO Host commands for ISO15693
REQUEST-DATA
6
0x27 MODE
RESPONSE-DATA (STATUS = 0x95)
7
ISO15693
ERROR
MODE:
Bit:
Function
ADR:
b000
b001
b010
UID:
Read-only serial number of the Transponder. The UID is required only in the addressed
mode.
AFI:
Application Family Identifier of the Transponder.
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS
= 0x95.
Note:
•
This command is only available for ISO15693 Transponders.
FEIG ELECTRONIC GmbH
7 (8...15)
UID
7 6
0 0
non-addressed
addressed
selected
Manual
9 / (16)
AFI
5 4
0 0
Page 97 of 125
ID ISC.PRHD102
Transponders.
3 2 1
0 ADR
H71101-2e-ID-B.doc
0