Feig Electronic OBID i-scan ID ISC PRHD102 Manual page 32

®
OBID i-scan
ISO 15693 OPTION: (Transponder.HF.ISO_15693.Miscellaneous.WriteOption)
Bit:
Function
WR-OPTION:
b00:
b10:
b11:
Note:
•
If WR-OPTION is automatically set, the Reader sets the WR-OPTION to 0, if the ISO15693
Host Command is in non-addressed mode
ISO-Read-Option:
Bit:
Function
Blocksize: (Transponder.HF.ISO_15693.Miscellaneous.ReadOption.BlockSize)
Defines the block size of an ISO-transponder which is not listed in the MFR-table
(see: 9.2. Supported ISO Host commands for
the transponder is used in the non-addressed mode.
Range: 0x01 ... 0x1F
A value of 0x00 will be automatically set to a block size of 4byte.
Blocksize Selection: (Transponder.HF.ISO_15693.Miscellaneous.ReadOption.
b0:
b1:
Read Mode: (Transponder.HF.ISO_15693.Miscellaneous.ReadOption.ReadMode)
b00:
b01
b10
FEIG ELECTRONIC GmbH
7 6 5
0 0 0
automatically set
Tag Option = 0
Tag Option = 1
7 6 5
Read Mode Blocksize
Selection
Automatic (If transponder is known)
Manuel (As specified in DB-Blocksize)
Automatic Mode (If transponder is known)
Single Read
Multiple Read
Page 32 of 125
Manual
4 3 2
0 WR-OPTION
4 3
Blocksize
ISO15693
ID ISC.PRHD102
1 0
0 0
2 1 0
Transponders) or if
BlockSizeSelection)
H71101-2e-ID-B.doc