Feig Electronic OBID i-scan ID ISC PRHD102 Manual page 15

®
OBID i-scan
Example 5:
COM- Separation
ADR Character
COM- SEP-CHAR
ADR
Scan-Mode via USB-Interface (HID-Mode):
If an USB-Reader is set to Scan-Mode the reader works like a keyboard. The data will be trans-
ferred as USB Key Code or as hex-values.
The user defined Sep- and End- Character will be transfered as USB Key Code.
If the number of transmitted user data is too large, only the maximal number of transmitted data will
be sent plus the end character.
Note:
•
If configuration protocols shall be sent to the Reader while the Scan-Mode is active, no
Transponder should be within the detection range of the Reader during this time.
•
Only read operations are available with the Scan-Mode.
FEIG ELECTRONIC GmbH
Manual
Header
USR1 USR2 USR3
(see: 4.10. CFG13:
Page 15 of 125
Separation
UID
Character
USR4 UID SEP-CHAR
Scan-Mode)
ID ISC.PRHD102
Data-
END Character
Blocks
DB USR USR USR
1 2
H71101-2e-ID-B.doc
3