Enable Ftp Protocol; Enable Ftp Protocol For Océ Tds/Tcs Systems (Except Océ Tds7X0, Océ Tcs300) - Canon Oce TDS Series Administration Manual

Enable FTP protocol

Enable FTP protocol
Before you begin
• You MUST be logged on as a system administrator.
• The FTP protocol is enabled by default on the Océ Wide-format printing systems. Make sure it
is enabled on your printing system.
Enable FTP protocol for Océ TDS/TCS systems (except Océ TDS7x0, Océ
TCS300)
Procedure
1. Switch the Océ Settings Editor in SA Mode.
2. Select 'Connectivity' - 'FTP' - 'Enable FTP'.
3. Select 'Enabled' on the right panel ('Enable FTP').
4. Click 'Apply'.
You are proposed to reboot the controller.
Either, click 'OK' and go on with the other parameters setup, or, once all the setups are done,
reboot the controller.
36 Chapter 2 - Configure the print system controller
Océ TDS/TCS/TC Connectivity information for Windows environments