Enable Ftp Protocol For Océ Tcs300 - Canon Oce TDS Series Administration Manual

Enable FTP protocol for Océ TCS300
Enable FTP protocol for Océ TCS300
Procedure
1. From a client workstation, open a web browser and access the Océ Express WebTools:
http://<IP-ADDRESS>
or
http://<printer HOSTNAME>
2. In the 'Configuration' tab, select 'Network' (or 'Connectivity').
3. In the 'FTP' section, click on 'Edit'.
The 'FTP' window pops up.
4. Check the 'FTP' setting box to enable the FTP protocol.
5. Click 'OK' to validate the new value and close the window.
You are proposed to restart the controller.
Either, select 'Restart later' and go on with the other parameters setup; or, once all the setups are
done, restart the controller (select 'Restart now').
38 Chapter 2 - Configure the print system controller
Océ TDS/TCS/TC Connectivity information for Windows environments