Enable Lpr/Lpd Protocol For Océ Tcs300 - Canon Oce TDS Series Administration Manual

Enable LPR/LPD protocol for Océ TCS300
Procedure
1. From a client workstation, open a web browser and access the Océ Express WebTools:
http://<IP-ADDRESS>
or
http://<printer HOSTNAME>
2. In the 'Configuration' tab, select 'Network' (or 'Connectivity').
3. In the 'LPD' section, click on 'Edit'.
The 'LPR/LPD' window pops up.
4. Check the 'LPR/LPD' setting box to enable the LPR protocol.
5. Click 'OK' to validate the new value and close the window.
Océ TDS/TCS/TC Connectivity information for Windows environments
Enable LPR/LPD protocol for Océ TCS300
Chapter 2 - Configure the print system controller 35