Configure The Tcp/Ip Settings In A Network Configuration By Dhcp (Océ Tds/Tcs Systems -Except Tcs300) - Canon Oce TDS Series Administration Manual

Configure the TCP/IP settings in a network configuration by DHCP (Océ TDS/TCS systems -except TCS300)
Configure the TCP/IP settings in a network configuration by DHCP (Océ
TDS/TCS systems -except TCS300)
Introduction
The procedures given below apply to the following user interfaces:
• Océ TDS/TCS Settings Editor or Océ Remote Logic
• Océ TDS700, TDS750 and Océ TC4 Power Logic Controller or Océ Power Logic Controller
Remote
Before you begin
• Log on as a System Administrator.
• Switch the Océ Settings Editor in SA mode.
Switch the Océ Settings Editor in SA Mode on page 128
See:
Illustration
Configure the TCP/IP settings with the help of the Océ Settings Editor or the Océ Power Logic
Step Océ TDS/TCS systems
1 Click the 'System' icon.
2 Expand the following folders:
• 'Connectivity'
• 'TCP/IP (IPv4)'
• 'Adapter 1'
26 Chapter 2 - Configure the print system controller
Océ TDS7x0 system
Click the 'Configuration' link.
Click 'Edit' on 'TCP/IP (IPv4)' section.
Océ TDS/TCS/TC Connectivity information for Windows environments
4