Connect To The Printer Model - Canon Oce TDS Series Administration Manual

3. Connect to the printer model

Procedure
1. The [Installation Wizard] searches for connected printers:
If
your printer is detectable
Printer discovery with WPD/
(see:
WPD2 on page
no printer is detected
Printer discovery with Océ
(see:
WPD/WPD2 on page
your printer is not detected
Printer discovery with WPD/
(see:
WPD2 on page
Click [Next].
2. Follow the instructions on the screen. Find more details in the next procedures:
Express installation on page 86
•
Custom installation on page 88
•
NOTE
From the [Installation Wizard], click the [?] icon to get contextual information.
Océ TDS/TCS/TC Connectivity information for Windows environments
14)
14)
14)
Then
The setup automatically detects your printer.
Select it from the list to confirm.
[13] Detected printers
[14] No printer detected - Printer not detectable
• Make sure the printer is connected to your network.
• Make sure the printer status is Ready.
• Click [Retry a detection of printers in your local net-
work].
• If unsuccessful, enter the hostname or IP address of
the printer.
• Make sure the printer is connected to your network.
• Make sure the printer status is Ready.
• Click the 'Refresh' icon .
• If unsuccessful, click [My printer is not in the list].
• Enter the hostname or IP address of the printer
3. Connect to the printer model
Chapter 3 - Print via LPD/LPR 85