Get To Know The Type Of Tcp/Ip Network - Canon Oce TDS Series Administration Manual

Get to know the type of TCP/IP network

When to do
The next procedure applies to the Océ TCS300.
Procedure
1. Get an IP address assigned by DHCP.
To do so, refer to the procedure in the next table.
How to get the IP address with the Printer Control Panel (Océ TCS300)
Step Océ TCS300
1 From the User Panel, select 'Configure System' - 'Next' - Network settings adapter 1'-
'Next'.
2 Click 'Edit' to start the Wizard.
3 Select:
• 'Use DHCP for adapter 1' -'Yes'
• 'Use DHCP for default gateway' -'Yes'
• 'Use DHCP for DNS' -'Yes'
• 'Use DHCP for Wins' -'Yes'
Click 'Apply'.
4 Wait until the network settings are acquired. Then finish the Wizard.
5 Restart the printer.
6 Repeat step 1.
7 Check the IP address.
2. Check the type of network according to the IP address:
If the IP address
is NOT within the
[169.254.1.0 -
169.254.254.255] range
is WITHIN the [169.254.1.0 -
169.254.254.255] range
3. Cancel the Wizard without changing any network setting.
4. Click 'Close'.
Océ TDS/TCS/TC Connectivity information for Windows environments
Then
It is a configuration by DHCP.
Make sure it matches with the DHCP reservation. If not, contact
the network administrator.
See: Automatic network configuration by DHCP on page 24
You probably need a configuration with a fixed IP address.
Make sure you know all the TCP/IP parameters.
Manual configuration with a fixed IP address on page 28
See:
Chapter 2 - Configure the print system controller
Get to know the type of TCP/IP network
23