Configure The Tcp/Ip Settings: Prepare The Configuration For A First Installation; Check The Mac Address Filtering - Canon Oce TDS Series Administration Manual

Configure the TCP/IP settings: prepare the configuration for a first
installation
Before you begin
IMPORTANT
The preparation of the configuration is only described for the Océ TCS300.
For the other Océ TDS/TCS systems, contact your Océ representative if needed. An Océ
technician must prepare the configuration.
Before you configure the TCP/IP settings on an Océ TCS300, you must:
• know if a Media Access Control (MAC) address filtering is present
• know the type of TCP/IP network
• check the connectivity according to the type of TCP/IP network (if not known)

Check the MAC address filtering

Procedure
1. You must know if a MAC address filtering is implemented in the network where the printing
system is to be integrated.
If
yes
no
you don't know
Where do I find the MAC address?
To know the MAC address of your printer you can:
• at reception time, find the MAC address on the printer box;
• within the device, find the MAC address on a sticker located on the printer controller hardware;
• or, contact your Océ technician or representative.
Océ TDS/TCS/TC Connectivity information for Windows environments

Configure the TCP/IP settings: prepare the configuration for a first installation

Then
The network administrator MUST declare the Océ system MAC ad-
dress within the network.
You cannot perform the configuration and you cannot use the Océ
printing system in the network without a declaration of the MAC
address where a MAC address filtering is implemented.
Go on with the next check.
Ask the network administrator.
Chapter 2 - Configure the print system controller 21