Technical Support; Residual Risk - SINTERIT POWDER HANDLING STATION User Manual

The abovementioned exclusions of warranty apply as well to any other liability of Sinterit, to the widest extent permitted
by the applicable law.
Terms of liability of sellers other than Sinterit such as distributors or resellers shall be regulated by them in separate
documents.

15. Technical support

The latest information, technical support, and versions of the manual are available by contacting us through:
• e-mail: www.sinterit.com/support-page
• telefon: +48 570 702 886
The list of distributors and technical support in specific countries can be found at www.sinterit.com/contact.

16. Residual risk

Even when the product is used as intended and prescribed, it is still impossible to eliminate certain residual risk factors.
The following hazards may arise in use and the operator should pay special attention or use additional equipment to avoid
the following:
A. Exposure to loss of stability and product overturning may cause bludgeoning or crushing - do not place any load on
the area dedicated for additional accessories (except those accessories), pay attention when transporting, installing,
operating, or maintaining the product,
B. Exposure to protruding blunt elements may cause bruises and/or stumbling and falling down - pay attention when
transporting, installing, operating, or maintaining the product,
C. Exposure to electric shock may cause severe health injuries (in case of using a power supply not specified by the
manufacturer*, without internal grounding, and/or connecting the power supply to a socket without an appropriate
connection for the protective grounding) - use only dedicated power supply, provided by the manufacturer,
D. Exposure to sharp edges may cause cuts - wear protection gear,
E. Exposure to sharp edges of used tools (metal brushes, probes, spatulas) may cause piercing damage - wear protection
glasses and/or protective gear,
F. Exposure to negative pressure through suction nozzles may cause hair or clothing to be sucked into the machine -
secure long hair and/or wear protection hat,
G. Exposure to rotating parts may cause hair or clothing to be caught and pulled into the machine - secure long hair and/
or wear protection hat,
H. Exposure to noise may cause hearing injury - wear ear protection and/or limit exposure,
I. Exposure to powders may cause discomfort and/or skin irritations - read the safety data sheet, wear protective gear
and/or limit exposure,
J. Inhalation of powders may cause respiratory irritation - read the safety data sheet, wear a protection mask and/or limit
exposure,
K. Clogged transportation auger - ensure no object (other than the powder) fell through the protective grill, use only
dedicated tools, and pay attention when using them
* The manufacturer is not responsible for any internal and/or external defect of the power supply used by the user if it does
not come directly from the manufacturer or designated party.
37 | POWDER HANDLING STATION Manual